JSB320 Multi-Function Module

The JSB320 USB Opto Isolated input with SPST relay provides an optically isolated inputs amd ADC with PGA for connections to user devices such as sensors or switches. The inputs senses DC voltage that can be read from the host PC, while providing full isolation. This eliminates surges present in industrial environments from effecting the host PC. The SPST relay outputs provide host control between a common line and normally open.
Single unit cost starts at USD$ 128
JSB320 Multi-Function Module
Features
* USB controlled Multi-function module
* USB controlled 15 Amp SPST relays (4)
* Opto Isolated digital Input (4)
* USB 4 Channel ADC with PGA
* High quality screw type terminal blocks
* High-Speed USB 2.0 device, USB 1.1 compatible
* Type B USB connector high-retention design
* All needed power drawn from USB port, no external power required for card
* Custom 32 and 64 bit Microsoft Windows drivers provided
* Info for linux and other OS support under software tab
Specifications
* 4ea SPST Relay ratings
AC Ratings 15A @ 125VAC 10A @ 250VAC
DC Ratings 10A @ 30VDC
Max Voltage 125VDC 250VAC
Contact Resistance: 200mOhm Max
Relay Closing Time: 10 milliseconds
Relay Releasing Time: 10 milliseconds
* 4 Opto Isolated Input
0-15V Range with 3.5V switch point
0-30V Range with 10V switch point
Reverse protection diodes
Optical isolation 2500VDC
Contact factory for higher input ranges
* 4ea ADC Channel
12bit or 16bit models
-5.0 to +5.0 V input range
128sps/12 bit to 8sps/16 bit Data Rate/bits
Integral Nonlinearity: (INL) 1LSB max
Single Ended (SE) or differential inputs (DI)
Programmable input gain amplifier (1,2,4, or 8)
* Self Powered from USB (high power Hub)
*Operating Temperature: -20 to +70 C
*Storage Temperature: -40 to +105 C
*Humidity 5% to 90% RH, without condensation
Software
Most of our customers write their own program for controlling our devices. With our provided API's you can use any programming language that supports DLL so you do not have to learn a whole new language. We provide two types of DLL api, first is the older standard DLL with both mangled calls and "C" calls. The second is the managed Class Library that supports all the new managed languages. Any programming language that supports calls to Windows DLL can also be used to control the cards. The software interface is easy to use from Visual Basic, Visual C# Visual C++ via a standard windows DLL with sample source included. Linux driver support CD available. Each module has an unique serial number string which allows multiple USB boards to be controlled by the host USB controller as individual USB devices. Click on blue tabs above to view other information about the module.
Ordering
JSB320-40015 USB Opto(0-15Volt) with relays (no ADC) Enter Qty
1-9 $128ea.
10- 49 $120.5ea.
50+ $110.25ea.
Add to Cart
JSB320-40030 USB Opto(0-30Volt) with relays (no ADC) Enter Qty
1-9 $128ea.
10- 49 $120.5ea.
50+ $110.25ea.
Add to Cart
JSB320-41215 USB Opto(0-15Volt) with relays and 12 Bit ADC Enter Qty
1-9 $160ea.
10- 49 $151ea.
50+ $138ea.
Add to Cart
JSB320-41230 USB Opto(0-30Volt) with relays and 12 Bit ADC Enter Qty
1-9 $160ea.
10- 49 $151ea.
50+ $138ea.
Add to Cart
JSB320-41615 USB Opto(0-15Volt) with relays and 16 Bit ADC Enter Qty
1-9 $190ea.
10- 49 $179ea.
50+ $163.5ea.
Add to Cart
JSB320-41630 USB Opto(0-30Volt) with relays and 16 Bit ADC Enter Qty
1-9 $190ea.
10- 49 $179ea.
50+ $163.5ea.
Add to Cart
JSB320-Linux Linux Support Disk (one time purchase) Enter Qty
1-9 $30ea.
10- 49 $30ea.
50+ $30ea.
Add to Cart
*Open Connector pdf file (printable)
JSB320 Relay, ADC, Opto Input Pinout Dwg
*Open Mechanical pdf file (printable)
JSB320 Relay, ADC, Opto Input Mechanical Dwg
*Open Interface pdf file (printable)
*Open Interface pdf file (printable)
Software Downloads
Labview Support
*Download Using Labview (pdf file)
Non-Windows OS Support (Linux and others)
*Download Using non-windows OS (pdf file)
Important readme about using dll with versions of windows .net Readme pdf
On some installations of Windows 7 and Windows 8 that are not configured to search the CD for drivers, it may show driver
not install and you need to do a manual install. If there is not yet a custom install under software downloads
you can download the pdf and zip of the generic install and copy your existing driver files from the CD, or do a manual install from PDF
Readme pdf
Generic install zip file
View Videos at Google+
J-Works,Inc
Email: sales@j-works.com
Solution Graphics

Page Last Updated May 5, 2015