JSB382 single channel Opto Input Module

The jsb382 USB Digital Opto Isolated input board provides one (1) optically isolated input for connections to user devices such as sensors or switches. The firmware latches a change from the off to on position until it is read from the USB. When the USB reads the data from the usb opto board, the module returns the current state of the input line, and whether the state turned on since the last reading. The input senses DC voltage that can be read from the host PC, while providing full isolation. This eliminates surges present in industrial environments from effecting the host PC. Single unit cost starts at $39.5 . JSB382 single channel Opto Input Module
Features
* Opto Isolated digital Input
* Multiple input ranges
* High quality screw type terminal blocks
* Optional Molex KK series header
* High-Speed USB 2.0 device, USB 1.1 compatible
* Type B USB connector high-retention design
* All needed power drawn from USB port, no external power required for card
* Custom 32 and 64 bit Microsoft Windows drivers provided
* Info for linux and other OS support under software tab
Specifications
* Optocoupler Digital Input
0-15V Range with 3.5V switch point
0-30V Range with 10V switch point
Data is latched on going high
Reverse protection diodes
Optical isolation 2500VDC
Contact factory for higher input ranges
* Self Powered from USB (high power Hub)
* Additional Opto Input Modules
2 channel JSB381
4 or 8 channel JSB383
16 channel JSB385
*Operating Temperature: -20 to +70 C
*Storage Temperature: -40 to +105 C
*Humidity 5% to 90% RH, without condensation
Software
Most of our customers write their own program for controlling our devices. With our provided API's you can use any programming language that supports DLL so you do not have to learn a whole new language. We provide two types of DLL api, first is the older standard DLL with both mangled calls and "C" calls. The second is the managed Class Library that supports all the new managed languages. Any programming language that supports calls to Windows DLL can also be used to control the cards. The software interface is easy to use from Visual Basic, Visual C# Visual C++ via a standard windows DLL with sample source included. Linux driver support CD available. Each module has an unique serial number string which allows multiple USB boards to be controlled by the host USB controller as individual USB devices. Click on blue tabs above to view other information about the module.
Ordering
jsb382A-241TB USB 0-30Volt with Terminal Block Enter Qty
1-9 $39.5ea.
10- 49 $34ea.
50+ $30.5ea.
Add to Cart
jsb382A-151TB USB 0-15Volt with Terminal Block Enter Qty
1-9 $39.5ea.
10- 49 $34ea.
50+ $30.5ea.
Add to Cart
jsb382A-241KK USB 0-30Volt with KK header Enter Qty
1-9 $37.5ea.
10- 49 $32.25ea.
50+ $29ea.
Add to Cart
jsb382A-151KK USB 0-15Volt with KK header Enter Qty
1-9 $37.5ea.
10- 49 $32.25ea.
50+ $29ea.
Add to Cart
JSB382-Linux Linux Support Disk on Standard CD Enter Qty
1-9 $0ea.
10- 49 $0ea.
50+ $0ea.
Add to Cart
*Open Connector pdf file (printable)
JSB382 USB Digital Opto-isolated Pinout Dwg
*Open Mechanical pdf file (printable)
JSB382 USB Digital Optocoupler Mechanical Dwg
*Open Interface pdf file (printable)
JSB382 USB Digital Opto-isolated Circuit Dwg
jwControl Software Downloads
*Download jwControl CD V3.03 (5 July 2017) (zip file)
*Download Version History pdf (zip file)
This software replaces previous versions of module support software. It is a generic package that will provide support for all J-Works USB Modules. It is recommended that any new designs start with this package, and existing designs be moved over, if/when there is windows updates that require changes to the driver or API, the updates will only be made on jwControl CD. Also additional sample applications will be added to this CD only. There will be a larger number then normal revisions to this package, but most will not affect modules already supported, but is updates for modules not currently supported, or new samples. The Version History pdf outline changes
Labview Support
*Download Using Labview (pdf file)
Non-Windows OS Support (Linux and others)
*Download Using non-windows OS (pdf file)
Important readme about using dll with versions of windows .net Readme pdf
On some installations of Windows 7 and Windows 8 that are not configured to search the CD for drivers, it may show driver
not install and you need to do a manual install. If there is not yet a custom install under software downloads
you can download the pdf and zip of the generic install and copy your existing driver files from the CD, or do a manual install from PDF
Readme pdf
Generic install zip file
Before plugging module into the USB port, install driver as follows
1)Download jwControl software and exact from zip file
2)Run (double click) the batch file "DriverInstall.bat" in the top level of the software package
3)On some systems you may be asked if it is ok to run the program, click yes
4)On the welcome page dialog, click next to start install
5)When it completes done screen will be displayed, click finish
6)The module can now be plugged in, and green module led will come on
View Videos at Google+
J-Works,Inc
Email: sales@j-works.com
Solution Graphics

Page Last Updated Nov 20, 2015