MSB3102 USB 2 Channel Event Counter Module

The MSB3002 is a USB event counter module designed to maintain a count of digital pulses as single ended 3.3V or 5V inputs. The provided API can be used to obtain the current count of both channels. Reset of the counters can either be done by a external reset pin, or an api commmand. Counters will roll-over at max 24 bit count. Single unit cost starts at $82.5 . MSB3102 USB 2 Channel Event Counter Module
* USB 24 bit Event Counter
* Digital 3.3v and 5V
* Terminal Block Connector
* external or api reset
* High-Speed USB 2.0 device, USB 1.1 compatible
* Type B USB connector high-retention design
* All needed power drawn from USB port, no external power required for card
* Custom 32 and 64 bit Microsoft Windows drivers provided
* Info for linux and other OS support under software tab
* 24 bit counter
1 Mhz max frequency
min pulse width 20nsec
software debounce
* count edge programmable
rising edge
falling edge
every rising and falling
* Single Ended Input
5V tolerant
* Up to 2 channels per module
* Socket for Input Pull-Up Resistor Packs
* Self Powered from USB (high power Hub)
5V 300ma available for external devices
*Operating Temperature: -20 to +70 C
*Storage Temperature: -40 to +105 C
*Humidity 5% to 90% RH, without condensation
Most of our customers write their own program for controlling our devices. With our provided API's you can use any programming language that supports DLL so you do not have to learn a whole new language. We provide two types of DLL api, first is the older standard DLL with both mangled calls and "C" calls. The second is the managed Class Library that supports all the new managed languages. Any programming language that supports calls to Windows DLL can also be used to control the cards. The software interface is easy to use from Visual Basic, Visual C# Visual C++ via a standard windows DLL with sample source included. Linux driver support CD available. Each module has an unique serial number string which allows multiple USB boards to be controlled by the host USB controller as individual USB devices. Click on blue tabs above to view other information about the module.
MSB3102-TB05 USB 2 channel event counter terminal block Enter Qty
1-9 $82.5ea.
10- 49 $72ea.
50+ $65.25ea.
Add to Cart
*Open Connector pdf file (printable)
MSB32102 Event Counter Pinout Dwg
*Open Mechanical pdf file (printable)
MSB3102 Event Counter Mechanical Dwg
*Open Interface pdf file (printable)
MSB3102 Event Counter Circuit Dwg
jwControl Software Downloads
*Download jwControl CD V2.8 (4 Feb 2017) (zip file)
*Download Version History pdf (zip file)
This software replaces previous versions of module support software. It is a generic package that will provide support for all J-Works USB Modules. It is recommended that any new designs start with this package, and existing designs be moved over, if/when there is windows updates that require changes to the driver or API, the updates will only be made on jwControl CD. Also additional sample applications will be added to this CD only. There will be a larger number then normal revisions to this package, but most will not affect modules already supported, but is updates for modules not currently supported, or new samples. The Version History pdf outline changes
Labview Support
*Download Using Labview (pdf file)
Non-Windows OS Support (Linux and others)
*Download Using non-windows OS (pdf file)
Important readme about using dll with versions of windows .net Readme pdf
On some installations of Windows 7 and Windows 8 that are not configured to search the CD for drivers, it may show driver
not install and you need to do a manual install. If there is not yet a custom install under software downloads
you can download the pdf and zip of the generic install and copy your existing driver files from the CD, or do a manual install from PDF
Readme pdf
Generic install zip file
Before plugging module into the USB port, install driver as follows
1)Download jwControl software and exact from zip file
2)Run (double click) the batch file "DriverInstall.bat" in the top level of the software package
3)On some systems you may be asked if it is ok to run the program, click yes
4)On the welcome page dialog, click next to start install
5)When it completes done screen will be displayed, click finish
6)The module can now be plugged in, and green module led will come on
View Videos at Google+
Solution Graphics

Page Last Updated Jan 10, 2016