RSB2084 2 or 4 8 Amp Latching SPST Relay Module

The RSB2084 USB Relay board provides 2 or 4 Latching SPST relays for connection to user devices. The SPST relays outputs provide host control between a common line and normally open connection point. A latching relay has two relaxed states (bistable). These relays are called impulse, keep or stay types. When the power is switched off the relays, the relay remains in its last state. The relay retains the last state during any power outages, and will only switch when command to by the host PC.With the onboard latching relays, the last command state of the relay is maintained even after power has been removed from the board. Wire connection to the module relay contacts is with screw type high quality terminal blocks.
Single unit cost starts at USD$ 90
RSB2084 2 or 4 8 Amp Latching SPST Relay Module
Features
* USB Controlled 8 Amp Latched SPST Relays
* High quality screw type terminal blocks
* 2 or 4 latched relays
* High-Speed USB 2.0 device, USB 1.1 compatible
* Type B USB connector high-retention design
* All needed power drawn from USB port, no external power required for card
* Custom 32 and 64 bit Microsoft Windows drivers provided
* Info for linux and other OS support under software tab
Specifications
* SPST NO single pole single throw Relay ratings
Maintains last state when powered down
AC Ratings 8A 250VAC
DC Ratings 5A @ 30VDC
Max Voltage 125VDC 250VAC
Max switching voltage (resistive load) 2000VA, 150W
Contact Resistance (initial): 150mOhm Max
Relay Closing Time: 10 milliseconds
Relay Releasing Time: 5 milliseconds
* Self Powered from USB (high power Hub)
*Operating Temperature: -20 to +70 C
*Storage Temperature: -40 to +105 C
*Humidity 5% to 90% RH, without condensation
Software
Most of our customers write their own program for controlling our devices. With our provided API's you can use any programming language that supports DLL so you do not have to learn a whole new language. We provide two types of DLL api, first is the older standard DLL with both mangled calls and "C" calls. The second is the managed Class Library that supports all the new managed languages. Any programming language that supports calls to Windows DLL can also be used to control the cards. The software interface is easy to use from Visual Basic, Visual C# Visual C++ via a standard windows DLL with sample source included. Linux driver support CD available. Each module has an unique serial number string which allows multiple USB boards to be controlled by the host USB controller as individual USB devices. Click on blue tabs above to view other information about the module.
Ordering
RSB2084-02 USB 2 Latching Relay Enter Qty
1-9 $90ea.
10- 49 $78.5ea.
50+ $71.25ea.
Add to Cart
RSB2084-04 USB 4 Relay Enter Qty
1-9 $145ea.
10- 49 $126.25ea.
50+ $114.75ea.
Add to Cart
RSB2084-Linux Linux Support Disk On Standard CD Enter Qty
1-9 $0ea.
10- 49 $0ea.
50+ $0ea.
Add to Cart
*Open Connector pdf file (printable)
JSB2084 SPST Latching Pinout Dwg
*Open Mechanical pdf file (printable)
JSB2084 SPST Latching Mechanical Dwg
*Open Interface pdf file (printable)
*Open Interface pdf file (printable)
jwRelay Software Downloads
*Download jwRelay CD V1.8 (zip file)
*Download jwRelay NI CVI Sample (zip file)
Labview Support
*Download Using Labview (pdf file)
Non-Windows OS Support (Linux and others)
*Download Using non-windows OS (pdf file)
Important readme about using dll with versions of windows .net Readme pdf
On some installations of Windows 7 and Windows 8 that are not configured to search the CD for drivers, it may show driver
not install and you need to do a manual install. If there is not yet a custom install under software downloads
you can download the pdf and zip of the generic install and copy your existing driver files from the CD, or do a manual install from PDF
Readme pdf
Generic install zip file
View Videos at Google+
J-Works,Inc
Email: sales@j-works.com
Solution Graphics

Page Last Updated May 25, 2015