RSB4124WDT Watchdog timer with Video(bnc) and Audio connectors

The RSB4124 module provides a Watchdog Timer function that supports 2 channels of Video (BNC) and 4 channels of Audio (3pole 3.5mm Jack). Once enabled the user application must communicate with RSB4124 via the USB within a user programmed repeative time period. If this communications does not happen the relays are closed, rerouting the signals. Under the Circuit tab is a block showing the two options for relay routing. The -03 version closes the relay when the WDT is enabled, so that when power is off, or the time-out occurs it is opened.
Single unit cost starts at USD$ 167.5
RSB4124WDT Watchdog timer with Video(bnc) and Audio connectors
* USB WDT Time
* BNC connectors to support Video Switching
* 3.5mm Audio Jack sockets (3 pole)
* Optional 4 pin Molex KK series Headers
* High-Speed USB 2.0 device, USB 1.1 compatible
* Type B USB connector high-retention design
* All needed power drawn from USB port, no external power required for card
* Custom 32 and 64 bit Microsoft Windows drivers provided
* Info for linux and other OS support under software tab
* Relay ratings
Form C (DPDT for Audio Jacks)
Form C (SPDT for BNC)
2Amp @ 30VDC 60W
Max DC Voltage 110VDC@ .5A
Insertion loss DC-100Mhz less then 0.05db
Insertion loss 100Mhz-1000Mhz less then 0.7db
Isolation DC-100Mhz 60db
* 2 relays switches 4ea BNC Connectors
* 4 relays switches between optional connectors
* Connector Option JACK
8ea 3.5mm Audio Jack (3 pole)
Tip, Ring and Ground connection
Tip and Ring are switched by single relay
* Connector Option KK
4 pin Molex KK series header
One pin key
* Watchdog timer programmable from 100millisec to 60 minutes
* Uses standard WDT205 software CD
* Option mounting plate to match existing hole patterns
RSB4124 mounts on plate via stand-offs
Hole pattern and size of mount plate user specified
min size of plate 2.2 x 3.9 inches
max size of plate is 3 x 5 inches
Contact factory for required data input for plate
* Self Powered from USB (high power Hub)
*Operating Temperature: -20 to +70 C
*Storage Temperature: -40 to +105 C
*Humidity 5% to 90% RH, without condensation
Most of our customers write their own program for controlling our devices. With our provided API's you can use any programming language that supports DLL so you do not have to learn a whole new language. We provide two types of DLL api, first is the older standard DLL with both mangled calls and "C" calls. The second is the managed Class Library that supports all the new managed languages. Any programming language that supports calls to Windows DLL can also be used to control the cards. The software interface is easy to use from Visual Basic, Visual C# Visual C++ via a standard windows DLL with sample source included. Linux driver support CD available. Each module has an unique serial number string which allows multiple USB boards to be controlled by the host USB controller as individual USB devices. Click on blue tabs above to view other information about the module.
Special Order only contact
*Open Connector pdf file (printable)
*Open Mechanical pdf file (printable)
*Open Interface pdf file (printable)
*Open Interface pdf file (printable)
Software Downloads
*Download Complete CD ver 2.0 (zip file)
Labview Support
*Download Using Labview (pdf file)
Non-Windows OS Support (Linux and others)
*Download Using non-windows OS (pdf file)
Important readme about using dll with versions of windows .net Readme pdf
On some installations of Windows 7 and Windows 8 that are not configured to search the CD for drivers, it may show driver
not install and you need to do a manual install. If there is not yet a custom install under software downloads
you can download the pdf and zip of the generic install and copy your existing driver files from the CD, or do a manual install from PDF
Readme pdf
Generic install zip file
View Videos at Google+
Solution Graphics

Page Last Updated