SSB119 USB InLine Control & Bridge

The SSB119 modulee is a 3 port usb switch that allows users to switch between 3 usb devices. USB signals from the device and maintain the make before break between the data and power. One relay controls the two power lines (VCC & GND), another controls the two USB data signal lines. This allows the user to turn one of three (3) USB devices on and off without removing the cable. Just plug the SSB119 inline with your devices for complete control.
Single unit cost starts at USD$ 125
SSB119 USB InLine Control & Bridge
* USB controlled switch to control 3ea USB devices
* Select 1 of 3 ports to connect to host
* Connect voltage before data to replicate standard connector use
* High-Speed USB 2.0 device, USB 1.1 compatible
* Type B USB connector high-retention design
* All needed power drawn from USB port, no external power required for card
* Custom 32 and 64 bit Microsoft Windows drivers provided
* Info for linux and other OS support under software tab
* Type A and Type B connectors for in-line insertion
* Data Relay rated for 900MHz
* Voltage relay rated for 2 Amp
* Self Powered from USB (high power Hub)
*Operating Temperature: -20 to +70 C
*Storage Temperature: -40 to +105 C
*Humidity 5% to 90% RH, without condensation
Most of our customers write their own program for controlling our devices. With our provided API's you can use any programming language that supports DLL so you do not have to learn a whole new language. We provide two types of DLL api, first is the older standard DLL with both mangled calls and "C" calls. The second is the managed Class Library that supports all the new managed languages. Any programming language that supports calls to Windows DLL can also be used to control the cards. The software interface is easy to use from Visual Basic, Visual C# Visual C++ via a standard windows DLL with sample source included. Linux driver support CD available. Each module has an unique serial number string which allows multiple USB boards to be controlled by the host USB controller as individual USB devices. Click on blue tabs above to view other information about the module.
SSB119-01 USB 3 port switch Enter Qty
1-9 $125ea.
10- 49 $108.75ea.
50+ $98.75ea.
Add to Cart
SSB119-Linux Linux Support Disk (one time purchase) Enter Qty
1-9 $5ea.
10- 49 $5ea.
50+ $5ea.
Add to Cart
*Open Connector pdf file (printable)
*Open Mechanical pdf file (printable)
*Open Interface pdf file (printable)
*Open Interface pdf file (printable)
jwRelay Software Downloads
*Download jwRelay CD V1.8 (zip file)
*Download jwRelay NI CVI Sample (zip file)
Labview Support
*Download Using Labview (pdf file)
Non-Windows OS Support (Linux and others)
*Download Using non-windows OS (pdf file)
Important readme about using dll with versions of windows .net Readme pdf
On some installations of Windows 7 and Windows 8 that are not configured to search the CD for drivers, it may show driver
not install and you need to do a manual install. If there is not yet a custom install under software downloads
you can download the pdf and zip of the generic install and copy your existing driver files from the CD, or do a manual install from PDF
Readme pdf
Generic install zip file
View Videos at Google+
Solution Graphics

Page Last Updated